Why Does My Rolls Royce Phantom Key Fob Not Work?
The Rolls-Royce Phantom conveys wealth and the status of a car. Its large waterfall grille and classic upright proportions are instantly recognizable. It is one of the most expensive cars around the globe.
The rolls royce key fob could stop working due to various reasons. The most common reason is a dead battery in the coin however it could be caused by water damage or problems with the receiver module.
Battery
The most common reason for the Rolls-Royce Phantom key fob not working is the dead coin battery within. However it is essential to keep in mind that the key fob may stop working due to a variety of other reasons, including water damage, worn buttons, bad battery contact, signal interference, or unpaired keys requiring reprogramming. Speak with key glock rolls royce TheKeyLab if the key fob is not working. A locksmith will quickly determine the problem and offer an immediate solution.
It is essential to shield the battery from dirt and moisture in order to ensure it remains fully functional. This is the reason why it is recommended to always make use of a waterproof key fob case while driving. It is also recommended to remove the battery from the key fob prior cleaning or washing it. Additionally, the chip inside the key fob is sensitive to water and should not be exposed to salty or soapy water. If the key fob is likely to be exposed to water, use electronic cleaner or isopropyl to avoid damage.
The battery pack of the Phantom EE is a unique power system with numerous advancements. This makes it stand out from other luxury cars powered by traditional power systems. For example the inclusion of there is a "power reserve dial" has been added to the dashboard, which conveys the car's energy status to the driver. This is a brand new design feature, which is designed to challenge the traditional car-related models and showcase the potential of alternative drive-train technology.
One of the major advantages of this electric powertrain is that it permits charging to be re-charged without the need for a physical connection between the vehicle and its charging station. This is done by using induction, which involves the transfer of power across two surfaces - an induction pad on the ground and an induction module underneath the battery pack.
Recharging takes place in two phases, and has a the capacity to charge total of 71kWh. Each phase is able to hold 13.5kW. This makes it the largest passenger car battery in the world. The Phantom EE also comes with three separate chargers that can be used for both single-phase or 3-phase charging and also regenerative braking.
Contacts
If your Rolls Royce Phantom remote key fob isn't functioning, the problem could be caused by an inactive battery or worn buttons. This problem is usually simple to solve. You can also try reprogramming the key fob or replacing the 12 volt battery. If the issue continues, the receiver module might have a fault. The remote keyless system and other onboard electronics use the receiver module to communicate with each other using radio signals. If the receiver module develops a fault, it will stop communicating with the key fob as well as other onboard electronics.
If you're having issues with the key fob, it is important to make sure the battery contacts are clean and dry. The metal retaining clips hold the button cell battery in place and complete the circuit and they are easily damaged by wet or dirty hands. Replace the battery with one of the same size and voltage. Before reassembling your key fob clean the surfaces of contact with rubbing alcohol or an electronic cleaner.
The key fob on the Rolls Royce Phantom is equipped with an electronic chip that transmits signals to the remote keyless system receiver module. The receiver module converts the signals into commands which the car can understand. This is how your car knows that you're looking to unlock the doors or retract the famous "flying lady" hood ornament into the grille.
If the key fob has been exposed to water, it should be removed immediately from the vehicle. Cleanse the electronic chip using electronic cleaner or isopropyl. If you do not then, the chip could be fried.
Water damage
The key fob is constructed with rubber seals that prevent the electronic chip inside from being exposed to water. This makes it immune to splashes and rain but not the kind of deep water immersion that could be experienced when you drop your key in the midst of a puddle, or when you submerge it in the ocean. If the fob gets wet, it's possible that the chip will become fried and you will need to get a new one.
Even if you didn't drop your key fob in the water, but it's soaked by a wet dog washing machine, or soapy handwashing, don't be discouraged since your phantom roll royce key fob could be salvageable. You can save money by following easy steps.
First, you must remove the key fob and dry it completely. Remove the battery when you can, and make use of compressed air to blow any excess moisture out of the key fob. After you have done this, let it dry for a few days before you use it.
If your key fob is susceptible to getting wet, it's a good idea to purchase a waterproof case which can shield it from damage. It's also an excellent idea to have a spare key on hand to avoid having to wait for the fob to dry out.
Your Rolls Royce Phantom remote key might stop working in certain cases due to interference, or an inactive battery. This issue is typically caused by objects, bad weather conditions, or transmitters that operate on the same frequency band as your remote.
Keep your key fob away from these sources. If you are unable to get rid of these sources of interference, you can relocate your car to a new location or reprogram your remote. If you can't fix the problem yourself, it's best that you seek out an expert technician. They will be able to identify the issue and determine if it's mechanical or electrical fault.
Reprogramming
The key fob in your Rolls Royce Phantom is an important component of your vehicle's security system. It sends commands to the receiver module, which sends them to the vehicle's central locking mechanism. If the key fob fails to work, it can be a frustrating and expensive issue. There are a few easy methods you can use to make sure your key fob is working again.
Examine if the battery in the key fob has died. This is the most common reason for Phantom key fobs not locking or unlocking. There are usually signs of degeneration, for example an increase in range. Replace the battery by an alternative one that has the same size, voltage, and specifications. Also, make sure the retaining clips made of steel that keep the battery in place aren't loosened.
Water damage is another possible cause. The key fob is equipped with rubber seals that block water from getting to the electronic chip inside, but should it be immersed in soapy or salty water, the seals might break down. If this happens, you should remove the battery and clean it with isopropyl alcohol or an electronic cleaner. After drying then put it back in the fob.
If the key fob does not work, it could be an indication that the receiver module has suffered a malfunction. The best way to diagnose this is to connect an diagnostic scanner to the OBD port on the dashboard of your Phantom. The scanner will request information about your vehicle, including the year, model and engine type. You'll also have to enter the code for your key fob.
Signal interference is another possible cause. This could be caused by weather conditions, objects or transmitters that operate on the same frequency. The remote control works when you are close to the Phantom but not from a distance. You can attempt to resolve this issue by removing any objects that might block the signal, or by moving the Phantom away from the transmitters.